 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MURS230T3, MURS240T3 Preferred Devices Surface Mount Ultrafast Power Rectifiers Ideally suited for high voltage, high frequency rectification, or as free wheeling and protection diodes in surface mount applications where compact size and weight are critical to the system. http://onsemi.com * * * * Small Compact Surface Mountable Package with J-Bend Leads Rectangular Package for Automated Handling High Temperature Glass Passivated Junction Low Forward Voltage Drop (0.95 Volts Max @ 2.0 A, TJ = 150C) ULTRAFAST RECTIFIERS 2 AMPERES 300-400 VOLTS Mechanical Characteristics: * Case: Epoxy, Molded * Weight: 95 mg (approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal * * * * Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260C Max. for 10 Seconds Shipped in 12 mm Tape and Reel, 2500 units per reel Polarity: Polarity Band Indicates Cathode Lead Marking: U2F, U2G SMB CASE 403A x = F (230T3) G (240T3) MARKING DIAGRAM U2x MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage MURS230T3 MURS240T3 Average Rectified Forward Current Symbol VRRM VRWM VR IF(AV) Value Unit V Device 300 400 1.0 @ TL = 150C 2.0 @ TL = 125C 35 A MURS230T3 MURS240T3 Package SMB SMB Shipping 2500/Tape & Reel 2500/Tape & Reel ORDERING INFORMATION Non-Repetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) Operating Junction Temperature Range IFSM A Preferred devices are recommended choices for future use and best overall value. TJ -65 to +175 C (c) Semiconductor Components Industries, LLC, 2001 1 February, 2001 - Rev. 4 Publication Order Number: MURS230T3/D MURS230T3, MURS240T3 THERMAL CHARACTERISTICS Rating Thermal Resistance, Junction to Lead (TL = 25C) Symbol RJL Value 13 Unit C/W ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (Note 1.) (iF = 2.0 A, TJ = 25C) (iF = 2.0 A, TJ = 150C) Maximum Instantaneous Reverse Current (Note 1.) (Rated dc Voltage, TJ = 25C) (Rated dc Voltage, TJ = 150C) Maximum Reverse Recovery Time (iF = 1.0 A, di/dt = 50 A/s) (iF = 0.5 A, iR = 1.0 A, IR to 0.25 A) Maximum Forward Recovery Time (iF = 1.0 A, di/dt = 100 A/s, Rec. to 1.0 V) 1. Pulse Test: Pulse Width = 300 s, Duty Cycle v 2.0%. 10 7.0 5.0 3.0 I , INSTANTANEOUS FORWARD CURRENT (AMPS) F 2.0 TC = 25C 1.0 0.7 0.5 0.3 0.2 10 7.0 5.0 3.0 I , INSTANTANEOUS FORWARD CURRENT (mA) F 2.0 TC = 25C 1.0 0.7 0.5 0.3 0.2 vF 1.30 1.05 iR 5.0 150 trr 65 50 tfr 50 ns ns A Volts 175C 100C 175C 100C 0.1 0.1 0.07 0.05 0.03 0.02 0.07 0.05 0.03 0.02 0.01 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 0.01 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 2.3 vF, INSTANTANEOUS VOLTAGE (VOLTS) vF, INSTANTANEOUS VOLTAGE (VOLTS) Figure 1. Typical Forward Voltage Figure 2. Maximum Forward Voltage http://onsemi.com 2 MURS230T3, MURS240T3 80 40 20 8.0 4.0 2.0 0.8 0.4 0.2 0.08 0.04 0.02 0.008 0.004 0.002 0 50 100 80 40 20 8.0 4.0 2.0 0.8 0.4 0.2 0.08 0.04 0.02 0.008 0.004 0.002 0 50 100 IR, REVERSE CURRENT ( mA) IR, REVERSE CURRENT ( mA) TJ = 175C TJ = 175C TJ = 100C TJ = 100C TJ = 25C TJ = 25C 150 200 250 300 350 400 150 200 250 300 350 400 VR, REVERSE VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 3. Typical Reverse Current* * The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if applied VR is sufficiently below rated VR. 30 25 C, CAPACITANCE (pF) 20 15 10 5 0 NOTE: TYPICAL CAPACITANCE AT 0 V = 26 pF 35 30 C, CAPACITANCE (pF) 25 20 15 10 5 0 4.0 8.0 12 16 20 24 28 32 36 40 0 0 4 Figure 4. Maximum Reverse Current* NOTE: MAXIMUM CAPACITANCE AT 0 V = 30 pF 8 12 16 20 24 28 32 36 40 VR, REVERSE VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 5. Typical Capacitance Figure 6. Maximum Capacitance 9 8 7 6 5 4 3 2 1 0 80 90 SQUARE WAVE 100 110 120 130 dc RATED VOLTAGE APPLIED RqJL = 13C/W TJ = 175C PF(AV) , AVERAGE POWER DISSIPATION (WATTS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) 10 5 TJ = 175C 4 3 2 1 0 SQUARE WAVE dc 140 150 160 170 180 0 0.5 1.0 1.5 2.0 2.5 TC, CASE TEMPERATURE (C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 7. Current Derating, Case Figure 8. Power Dissipation http://onsemi.com 3 MURS230T3, MURS240T3 PACKAGE DIMENSIONS SMB DO-214AA CASE 403A-03 ISSUE D S A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. D DIMENSION SHALL BE MEASURED WITHIN DIMENSION P. D B C INCHES DIM MIN MAX A 0.160 0.180 B 0.130 0.150 C 0.075 0.095 D 0.077 0.083 H 0.0020 0.0060 J 0.006 0.012 K 0.030 0.050 P 0.020 REF S 0.205 0.220 MILLIMETERS MIN MAX 4.06 4.57 3.30 3.81 1.90 2.41 1.96 2.11 0.051 0.152 0.15 0.30 0.76 1.27 0.51 REF 5.21 5.59 K P J H ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303-675-2167 or 800-344-3810 Toll Free USA/Canada N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (Mon-Fri 2:30pm to 7:00pm CET) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (Mon-Fri 2:00pm to 7:00pm CET) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (Mon-Fri 12:00pm to 5:00pm GMT) Email: ONlit@hibbertco.com EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 *Available from Germany, France, Italy, UK, Ireland CENTRAL/SOUTH AMERICA: Spanish Phone: 303-308-7143 (Mon-Fri 8:00am to 5:00pm MST) Email: ONlit-spanish@hibbertco.com Toll-Free from Mexico: Dial 01-800-288-2872 for Access - then Dial 866-297-9322 ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001-800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. http://onsemi.com 4 MURS230T3/D |
Price & Availability of MURS230T3
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |